routers experience warranty

ZORA VARIABLE SPEED ROLLERS ROUTER 230V/ 50-60Hz/ 3HP/ 2.2 kW/ 2,000 >> 10,000 RPM

Zora rollers variable speed

The ELECTRONIC ZORA VARIABLE SPEED ROLLERS ROUTER ( SHAPE - MILLING) MACHINE shapes and polishes the edges of any type of natural and synthetic material. The rotation speed can be finely adjusted from 2,000 to 10,000 rpm and is visualized on the designated measuring scale. The introduction of engineered stone has made necessary an intermediate speed on portable routers to avoid overheating and burning of resin - based tooling.

The ROLLERS SYSTEM allows you to work with small amount of water - in this case water is used only for cooling of the tool.

ZORA VARIABLE SPEED ROLLERS ROUTER allow to exploit the properties of every single tool to their maximum.

Specifications:

Spindle: Stainless steel; Rotation speeds: 2,000rpm to 10,000rpm;

Tool holder diameter: 22.2mm ( 0.87'');

Rise and fall: 30mm ( 1.18'');

Frame: Aluminum housing;

Power: 2.2 kW Electronic vectorial inverter;

Supply tensions: 230V/50-60Hz/ single phase;Thermal overload safety cut-out;

Base: Aquaplaning system;

Machine: length: 560mm ( 22''), width: 350mm ( 13.7''), height: 380mm ( 15'');

Power unit:  length: 400mm ( 15.75''), width: 200mm ( 7.9''), height: 300mm ( 11.8'');

Power cord: from Power unit to Machine: 6m ( 18ft), from Outlet to Power unit: 6m ( 20ft). 

Machine weight: 44.5kg (98lbs);

Packed into wooden case: 670 x 620 x 540mm;

Shipping weight: 58kg (128lbs).

Please note that we recomend ZORA VARIABLE SPEED ROLLERS ROUTER:

  1. in a case in which is necessary to use a smaller amount of water;
  2. to accoplish the three key steps in countertop fabrication: stock removal, shaping and polishing.